ACT ACTENTRY V-IP Manual de instalación descargar pdf (Pagina 23)

ACTentry V-IP Operating and Installation Manual

Page 22

5.0 SETTING A FIXED IP ADDRESS

By default the V-IP unit is supplied with support for DHCP server only. The IP

address is assigned by the server when the device powers up. In some

circumstances it might be necessary to fix the IP address of the V-IP unit.

The application „Telnet‟ is used to configure a fixed IP address. (Note: Telnet

is not available on Vista machines).

If the V-IP unit already has a known IP address, then to change it to a fixed

address, do the following:

1. Type cmd, to run the DOS command window.

2. telnet IP ADDRESS of V-IP Unit e.g. telnet 172.27.72.85

3. When prompted for the password, enter ACT

4. Type ? to get a list of commands

5. To set the ip address enter:

setip ip address gateway subnetmask

Eg. setip 172.27.72.63 172.27.72.254 255.255.255.0

6. IP address is now set to 172.27.72.63

7. Type quit to exit.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

Sin comentarios

ACT ACTENTRY V-IP Manual de instalación Pagina 23