ACT ACTENTRY V-IP Manual de instalación Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 30
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
ACTentry V-IP Operating and Installation Manual
Page 4
1.0 INTRODUCTION
1.1 System Overview
The ACTentry V-IP (Video/audio over IP) system is a TCP/IP based video-
doorphone system. Access to the building can be administered from any PC
on the TCP/IP network.
The system consists of:
1. ACTentry V-IP Door Panel:
The door panel has a Call button, colour video camera and audio unit.
Note: The extended versions of the entry panel has a cut out for an ACT
1030 panel mount proximity reader.
2. ACTentry V-IP Controller:
The controller has an Ethernet interface and converts video and audio
signals from Door Panel to TCP/IP data. It also has door and alarm inputs
and outputs. The relay for opening the door is contained in the V-IP unit for
additional security. The V-IP unit should always be on the secure side of
the door.
3. ACTentry V-IP Software:
The software requires a PC with a soundcard and ACT handset (provided)
and PC speakers (not provided).
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 29 30

Comentarios a estos manuales

Sin comentarios